How to Make a Samsung M2070 Series Go Online Again

Wireless network setup

	Make sure your machine supports wireless networking. Wireless networking may non be available depending on the model (run across Features past models). If the IPv6 network seems to not be working, set all the network settings to the factory defaults and try once more using .

Getting started

Understanding your network type

Typically, you can only have i connection between your computer and the machine at a fourth dimension.

	Infrastructure mode This is an surround generally used for homes and SOHOs (Small Role/ Home Office). This mode uses an access point to communicate with the wireless machine.
	Advertizement hoc mode This mode does not use an access betoken. The wireless computer and wireless motorcar communicate directly.

Wireless network name and Network Password

Wireless networks require college security, so when an access point is first set upward, a network name (SSID), the type of security used, and a Network Password are created for the network. Enquire your network administrator about this data before proceeding with the machine installation.

Introducing wireless set methods

You lot can set up wireless settings either from the machine or the estimator. Cull the setting method from the below table.

	Some wireless network installation types may not be bachelor depending on the model or country.

If problems occur during wireless set up or commuter installation, refer to the troubleshooting chapter (encounter Troubleshooting). It is strongly recommended that you set the password on Access Points. If you practice not set the password on Admission Points, they might be exposed to illegal access from unknown machines including PCs, smart phones and printers. Refer to the Admission Betoken user' guide for countersign settings.

Using the WPS push

If your machine and an admission point (or wireless router) support Wi-Fi Protected Setup™ (WPS), yous can easily configure the wireless network settings by pressing the (WPS) button on the control panel without a computer.

If yous want to utilize the wireless network using the infrastructure mode, brand sure that the network cable is disconnected from the machine. Using the push button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using. When using the WPS push button to gear up the wireless network, security settings may change. To preclude this, lock the WPS option for the current wireless security settings. The option name may differ depending on the access point (or wireless router) you lot are using.

Items to prepare

• Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS).

• Check if your machine supports Wi-Fi Protected Setup™ (WPS).

• Networked reckoner (PIN mode merely)

Choosing your blazon

There are 2 methods bachelor to connect your machine to a wireless network using the (WPS) push on the control panel.

The Push Push Configuration (PBC) method allows yous to connect your machine to a wireless network by pressing both the (WPS) button on the control panel of your automobile and the WPS (PBC) button on a Wi-Fi Protected Setup™ WPS-enabled admission point (or wireless router) respectively.

The Personal Identification Number (Pivot) method helps you lot connect your machine to a wireless network by inbound the supplied PIN information on a Wi-Fi Protected Setup™ WPS-enabled access signal (or wireless router).

Factory default in your auto is PBC fashion, which is recommended for a typical wireless network environment.

	You can change the WPS mode in control console ( () > > > > ).

Machines with a brandish screen

Connecting in PBC mode

1. Press and hold the (WPS) button on the control console for more than two seconds.

   The motorcar starts waiting for up to 2 minutes until you press the WPS (PBC) button on the access point (or wireless router).

2. Press the WPS (PBC) push button on the access point (or wireless router).

   The messages are displayed on the display screen in the order beneath:

   1. :The car is connecting to the admission point (or wireless router).

   2. :When the car is successfully connected to the wireless network, the WPS LED light stays on.

   3. :Later on completing the wireless network connexion process, the AP'southward SSID data appears on the display.

3. Insert the supplied CD into the CD-ROM drive and go on to install the software following the directions on the screen. When the "Connect Printer" screen appears, select the Network (Ethernet/Wireless) connexion.

Connecting in PIN mode

1. Press and hold the (WPS) button on the control panel for more 2 seconds.

2. The viii-digit PIN appears on the brandish.

   You need to enter the eight-digit Pin within 2 minutes on the figurer that is connected to the access signal (or wireless router).

   The messages are displayed on the display screen in the gild below:

   1. :The automobile is connecting to the wireless network.

   2. :When the auto is successfully connected to the wireless network, the WPS LED light stays on.

   3. :Subsequently completing the wireless network connection procedure, the AP'southward SSID data is displayed on the LCD brandish.

3. Insert the supplied CD into the CD-ROM drive and continue to install the software following the directions on the screen. When the "Connect Printer" screen appears, select Network (Ethernet/Wireless) connection.

Machines without a brandish screen

Connecting in PBC mode

1. Printing and hold the (WPS) push button on the command panel for well-nigh 2 - 4 seconds until the condition LED blinks chop-chop.

   The car starts connecting to the wireless network. The LED blinks slowly for up to two minutes until y'all press the PBC push button on the access point (or wireless router).

2. Press the WPS (PBC) button on the access betoken (or wireless router).

   1. The light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router).

   2. When the machine is successfully connected to the wireless network, the WPS LED light stays on.

3. Insert the supplied CD into the CD-ROM drive and proceed to install the software following the directions on the screen. When the "Connect Printer" screen appears, select the Network (Ethernet/Wireless) connection.

Connecting in PIN mode

1. The network configuration report, including Pin, must be printed (see Press a network configuration report).

   In prepare style, press and hold the ( or ) button on the command console for virtually 5 seconds. Y'all can discover your auto'south Pin.

2. Printing and hold the (WPS) button on the command panel for more than 4 seconds until the status LED stays on.

   The machine starts connecting to the admission betoken (or wireless router).

3. You need to enter the eight-digit PIN inside two minutes on the computer that is connected to the access point (or wireless router).

   The LED blinks slowly for up to two minutes until you enter the eight-digit PIN.

   The WPS LED blinks in the guild below:

   1. The low-cal blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router).

   2. When the machine is successfully connected to the wireless network, the WPS LED calorie-free stays on.

4. Insert the supplied CD into the CD-ROM bulldoze and go on to install the software following the directions on the screen. When the "Connect Printer" screen appears, select the Network (Ethernet/Wireless) connection.

Re-connecting to a network

When the wireless office is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address.

	In the following cases, the machine automatically re-connects to the wireless network: The car is turned off and on once again. The access point (or wireless router) is turned off and on again.

Canceling the connection process

To cancel the wireless network connection when the auto is connecting to the wireless network, printing and release the ( or ) on the control console. Y'all need to wait 2 minutes to re-connect to the wireless network.

Disconnecting from a network

To disconnect the wireless network connection, printing the (WPS) push on the control panel for more than than two seconds.

• When the Wi-Fi network is in idle way:The automobile is immediately disconnected from the wireless network and the WPS LED turns off.

• When the Wi-Fi network is being used:While the automobile waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected and the WPS LED turns off.

Using the menu button

	Some menus may not appear in the brandish depending on options or models. If then, it is not applicable to your machine (encounter Bill of fare overview).

Before starting, you will demand to know the network name (SSID) of your wireless network and the Network Password if it is encrypted. This information was set when the access point (or wireless router) was installed. If yous do not know near your wireless surroundings, please ask the person who set up your network.

1. Press the () push on the control panel.

2. Press > > .

3. Press the to select the setup method yous want.

   • (recommended):In this mode, the setup is automatic. The automobile will display a list of available networks from which to choose. Subsequently a network is chosen then printer will prompt for the corresponding security key.

   • :In this mode, users can give or edit manually their ain SSID , or choose the security choice in detail.

Setup using Windows

	Shortcut to the program without the CD: If you lot have installed the printer driver once, you can access the programme without the CD (come across Accessing management tools).

Access point via USB cable

Items to prepare

• Admission signal

• Network-continued computer

• Software CD that was provided with your machine

• A automobile installed with a wireless network interface

• USB cable

Creating the infrastructure network

1. Check wheter the USB cable is connected to the machine.

2. Turn on your computer, access point, and machine.

3. Insert the supplied software CD into your CD-ROM bulldoze.

   

   If the installation window does not announced, click > > > .

   Ten:\ replacing "X" with the letter, which represents your CD-ROM drive and click .

4. Review and accept the installation agreements in the installation window. Then, click .

5. Select on the screen. Then, click .

   

6. On the screen, select Then, click .

   If your printer is already connected on the network, select .

7. Subsequently searching, the window shows the wireless network devices. Select the proper name (SSID) of the access indicate you desire to use and click .

   If you cannot find the network proper name you desire to cull, or if you want to prepare the wireless configuration manually, click . :Enter the SSID of the admission point (SSID is case-sensitive). :Select . :Select an authentication type. :Authentication is not used, and encryption may or may not be used, depending on the demand for data security. :Authentication is used. A device that has a proper WEP key can admission the network. or :Select this choice to authenticate the print server based on a WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Central laissez passer phrase), which is manually configured on the access betoken and each of its clients. :Select the encryption (None, WEP64, WEP128, TKIP, AES, TKIP AES). :Enter the encryption network password value. :Confirm the encryption network countersign value. :If you are using WEP Encryption, select the appropriate .

   	The wireless network security window appears when the admission point has security settings. Enter the Network Password of the access point (or router).

8. If your printer supports Wi-Fi Direct and this function is disabled, its respective screen will appears.

   If you want to enable Wi-Fi Direct, check the checkbox, and click Next. If not, click simply Next. .

   

   	Wi-Fi Directly choice appears on the screen simply if your printer supports this feature. Tin start to build Wi-Fi Straight past using Samsung Easy Printer Manager (see Setting upward Wi-Fi Straight). : The default Wi-Fi Direct Name is the model name and the maximum length is 23 characters. is the numeric string, and the size is eight ~ 64 characters.

9. When the wireless network prepare up is completed, disconnect the USB cable between the computer and machine. Click .

10. Follow the instructions in the installation window.

Admission point without a USB cable (recommended)

Items to set

• WiFi-enabled PC running Windows 7 or higher and an access bespeak (router)

• Software CD that was provided with your machine

• A machine installed with a wireless network interface

	While setting the wireless network, the machine uses PC's wireless LAN. You might non be able to connect to the Net.

Creating the infrastructure network

1. Turn on your calculator, access signal, and motorcar.

2. Insert the supplied software CD into your CD-ROM drive.

   

   If the installation window does not announced, click > > > .

   10:\ replacing "X" with the letter of the alphabet, which represents your CD-ROM drive and click .

3. Review and accept the installation agreements in the installation window. Then, click .

4. Select on the screen. Then, click .

   

5. On the screen, select So, click .

   If your printer is already continued on the network, select .

6. Select on the screen. Then, click .

   

   	Even if your computer is running Windows vii or college, you cannot use this characteristic if your PC does non support wireless network. Prepare the wireless network using a USB cablevision (see Access signal via USB cable).

   If below screen appears, press the (WPS) push from the control panel within 2 minutes.

   

7. When the wireless network set upwardly is completed, click .

8. Follow the instructions in the installation window.

Advertizing hoc via USB cable

If you practice non accept an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps beneath.

Items to gear up

• Network-continued computer

• Software CD that was provided with your machine

• A machine installed with a wireless network interface

• USB cable

Creating the advertising hoc network in Windows

1. Turn on your reckoner and the wireless network car.

2. Insert the supplied software CD into your CD-ROM drive.

   

   If the installation window does not appear, click > > > .

   X:\ replacing "X" with the letter of the alphabet, which represents your CD-ROM bulldoze and click .

3. Review and have the installation agreements in the installation window. So, click .

4. Select on the screen. And so, click .

   

5. On the screen, select Then, click .

   If your printer is already continued on the network, select .

6. After searching the wireless networks, a listing of wireless networks your machine has searched appears. Click .

   :Enter the SSID name you want (SSID is example-sensitive). :Select ad hoc. :Select the aqueduct. ( or 2412 MHz to 2467 MHz). :Select an hallmark blazon. :Authentication is not used, and encryption may or may not exist used, depending on the need for data security. :Authentication is used. A device that has a proper WEP key can access the network. :Select the encryption (None, WEP64, WEP128). :Enter the encryption network password value. :Confirm the encryption network countersign value. :If yous are using WEP Encryption, select the advisable . The wireless network security window appears when the ad hoc network has security enabled. Select or for the hallmark and click . WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key.

7. The window showing the wireless network setting appears. Check the settings and click .

   Before inbound the IP address for the machine, y'all must know the computer'southward network configuration information. If the computer's network configuration is set to DHCP, the wireless network setting should also be DHCP. Also, if the calculator'due south network configuration is set to Static, the wireless network setting should also be Static. If your estimator is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. For the DHCP method If the IP accost assignment method is DHCP, check if DHCP is shown in the window. If it shows Static, click to change the assignment method to . For the Static method If the IP accost assignment method is Static, check if Static is shown in the window. If it shows DHCP, click to enter the IP address and other network configuration values for the machine. For example, If the calculator'southward network data is as shown follows: IP accost: 169.254.133.42 Subnet Mask: 255.255.0.0 Then, the machine's network information should be as below: IP address: 169.254.133. 43 Subnet Mask: 255.255.0.0 (Utilize the estimator'south subnet mask.) Gateway: 169.254.133. one

8. The window appears. Click .

9. When the wireless network settings are completed, disconnect the USB cable betwixt the computer and machine. Click .

10. Follow the instructions in the installation window.

Setup using Mac

Access indicate via USB cable

Items to gear up

• Access point

• Network-connected printer

• Software CD that was provided with your auto

• A automobile installed with a wireless network interface

• USB cable

1. Make sure that the machine is connected to your computer andpowered on.

2. Insert the supplied software CD into your CD-ROM drive.

   

3. Double-click the CD-ROM icon that appears on your Mac desktop.

   • For Mac Os X 10.8, double-click the CD-ROM that appears on .

4. Double-click the folder > icon.

5. Click .

6. Read the license agreement and click .

7. Click to hold to the license agreement.

8. Click . All components necessary for motorcar operations will be installed.

   If you click , you lot tin can choose individual components to install.

9. Enter the password and click .

10. Select on the and click .

    

11. If screen appears, select and click .

    If the screen does not appear, get to stride 15.

    

12. After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click .

    When you set up the wireless configuration manually, click . :Enter the SSID of the access bespeak (SSID is case-sensitive). :Select . :Select an authentication type. :Authentication is non used, and encryption may or may not be used, depending on the demand for data security. :Authentication is used. A device that has a proper WEP cardinal tin can access the network. or :Select this option to authenticate the print server based on the WPA Pre-Shared Key. This uses a shared hugger-mugger fundamental (by and large called Pre Shared Key pass phrase) that is manually configured on the access point and each of its clients. :Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES) :Enter the encryption network countersign value. :Ostend the encryption network countersign value. :If you are using WEP Encryption, select the advisable . The wireless network security window appears when the access betoken has security enabled. Enter the Network Countersign of the access signal (or router).

13. The window showing the wireless network setting appears. Bank check the settings and click .

    Wi-Fi Directly option appears on the screen only if your printer supports this characteristic. Tin can start to build Wi-Fi Direct past using Samsung Like shooting fish in a barrel Printer Managing director (see Setting up Wi-Fi Directly). : The default Wi-Fi Straight Proper noun is the model name and the maximum length is 22 characters. is the numeric string, and the size is viii ~ 64 characters.

14. The window appears. Click .

15. When the wireless network settings are completed, disconnect the USB cablevision between the computer and machine. Click .

Access betoken without a USB cable (recommended)

Items to gear up

• WiFi-enabled Mac running Mac Os 10.7 or college and an access point (router)

• Software CD that was provided with your car

• A motorcar installed with a wireless network interface

1. Make sure that the machine is continued to your computer andpowered on.

2. Insert the supplied software CD into your CD-ROM drive.

   

3. Double-click the CD-ROM icon that appears on your Mac desktop.

   • For Mac Os X 10.8, double-click the CD-ROM that appears on .

4. Double-click the folder > icon.

5. Click .

6. Read the license agreement and click .

7. Click to agree to the license agreement.

8. Click . All components necessary for motorcar operations will exist installed.

   If yous click , you tin choose individual components to install.

9. Enter the password and click .

10. Select on the and click .

    

11. If screen appears, select and click .

    If the screen does not appear, go to step 13.

    

    	If below screen appears, press the (WPS) push button from the command panel within two minutes.

12. When the wireless network set is completed, click .

13. After the installation is finished, click .

Advertisement hoc via USB cable

If you practice not accept an access signal (AP), you may still connect the machine wirelessly to your figurer by setting up an advertising hoc wireless network by following these uncomplicated directions.

Items to fix

• Network-connected reckoner

• Software CD that was provided with your machine

• A machine installed with a wireless network interface

• USB cable

Creating the ad hoc network in Mac

1. Brand sure that the motorcar is continued to your computer andpowered on.

2. Insert the supplied software CD into your CD-ROM drive.

   

3. Double-click the CD-ROM icon that appears on your Mac desktop.

   • For Mac OS X ten.8, double-click the CD-ROM that appears on .

4. Double-click the folder > icon.

5. Click .

6. Read the license agreement and click .

7. Click to agree to the license understanding.

8. Click . All components necessary for machine operations volition be installed.

   If you lot click , you can choose individual components to install.

9. Enter the password and click .

10. Select on the and click .

    

11. After searching the wireless networks, a listing of wireless networks your auto has searched appears. Click .

    :Enter the SSID name (SSID is instance-sensitive). :Select advert hoc. :Select the channel ( or 2412 MHz to 2467 MHz). :Select an authentication type. :Authentication is not used, and encryption may or may not be used, depending on the demand for information security. :Authentication is used. A device that has a proper WEP key can access the network. :Select the encryption (None, WEP64, WEP128). :Enter the encryption network countersign value. :Confirm the encryption network countersign value. :If y'all are using WEP Encryption, select the advisable . The wireless network security window appears when the ad hoc network has security setting. Select or for the authentication and click . WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-chip or 128-scrap WEP encryption key.

12. The window showing the wireless network settings appears. Check the settings and click .

    Earlier inbound the IP address for the machine, yous must know the computer'south network configuration information. If the computer'southward network configuration is gear up to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer'southward network configuration is set to Static, the wireless network setting should too be Static. If your figurer is set to DHCP and you want to use Static wireless network setting, y'all must contact the network administrator to get the static IP address. For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the window. If information technology shows Static, click to change the assignment method to . For the Static method If the IP accost assignment method is Static, check if Static is shown in the window. If it shows DHCP, click to enter the IP accost and other network configuration values for the car. For case, If the computer'due south network information is shown as follows: IP address: 169.254.133.42 Subnet Mask: 255.255.0.0 Then, the machine's network information should be equally shown below: IP accost: 169.254.133. 43 Subnet Mask: 255.255.0.0 (Employ the calculator'southward subnet mask.) Gateway: 169.254.133. i

13. When the window that tells y'all that the network cable connection is confirmed appears, disconnect the network cablevision and click ..

    If the network cable is connected, information technology may have trouble finding the machine when configuring the wireless network.

14. The wireless network connects co-ordinate to the network configuration.

15. Wireless network ready is completed. Subsequently installation is finished, click .

    	After completing the wireless network connectedness, yous demand to install a machine commuter to print from an awarding (see Installation for Mac).

Using a network cable

	Machines that do non support the network port volition not be able to apply this feature (see Rear view).

Your motorcar is a network compatible machine. To enable your machine to work with your network, you volition need to perform some configuration procedures.

	After completing the wireless network connection, you need to install a machine driver to print from an application (see Installing driver over the network). See your network administrator, or the person that set up your wireless network, for data virtually your network configuration.

Items to set up

• Admission signal

• Network-connected computer

• Software CD that was provided with your machine

• A motorcar installed with a wireless network interface

• Network cablevision

IP setting using SetIP Program (Windows)

This program is used to manually fix the network IP address of your car using its MAC accost to communicate with the automobile. The MAC address is the hardware series number of the network interface and can be found in the Network Configuration Report .

Come across Setting IP address.

Configuring the machine'due south wireless network

Before starting you volition demand to know the network name (SSID) of your wireless network and the Network Password if it is encrypted. This information was set when the admission indicate (or wireless router) was installed. If y'all do not know well-nigh your wireless environment, delight ask the person who set up your network.

To configure wireless parameters, you can use .

Using SyncThru™ Web Service

Before starting wireless parameter configuration, check the cable connectedness status.

1. Check whether or not the network cablevision is connected to the machine. If not, connect the machine with a standard network cablevision.

2. Kickoff a web browser such equally Internet Explorer, Safari, or Firefox and enter your auto'southward new IP address in the browser window.

   For example,

   

3. Click on the upper right of the SyncThru™ Spider web Service website.

4. Blazon in the and and then click .

   • :

   • :

5. When the window opens, click .

6. Click > .

   	will aid yous setup the wireless network configuration. However, if you desire to set the wireless network direct, select .

7. Select the one in the listing.

   • : SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must utilize the same SSID. The SSID is case sensitive.

   • : refers to the blazon of wireless connections (see Wireless network name and Network Password).

     • : Allows wireless devices to communicate directly with each other in a peer-to-peer environment.

     • : Allows wireless devices to communicate with each other through an access point.

   	If your network's is , select the SSID of the access betoken. If the is , select the motorcar'due south SSID. Annotation that "portthru" is the default SSID of your automobile.

8. Click .

   If the wireless security setting window appears, enter the registered password (Network Countersign) and click .

9. The confirmation window appears, please check your wireless setup. If the setup is correct, click .

   	Disconnect the network cable (standard or network). Your automobile should and then get-go communicating wirelessly with the network. In instance of Advertising-hoc mode, you tin utilise a wireless LAN and wired LAN simultaneously.

10. Insert the supplied CD into the CD-ROM bulldoze and proceed to install the software following the directions on the screen. When the "Connect Printer" screen appears, select the Network (Ethernet/Wireless) connection.

Turning the Wi-Fi network on/off

	If your car has a brandish, you can too turn on/off the Wi-Fi from the machine'south control panel using the menu.

1. Check whether the network cablevision is connected to the motorcar. If not, connect the automobile with a standard network cable.

2. Start a web browser such equally Cyberspace Explorer, Safari, or Firefox and enter your motorcar's new IP address in the browser window.

   For example,

   

3. Click on the upper correct of the SyncThru™ Web Service website.

4. Type in the and , and so click .

   • :

   • :

5. When the window opens, click .

6. Click > .

   Y'all can also turn the Wi-Fi network on/off.

Setting the Wi-Fi Direct for mobile printing

Wi-Fi Direct is an like shooting fish in a barrel-to-setup peer-to-peer connecting between method for your between a printer and mobile device that supports Wi-Fi Direct that provides a secure connectedness and better throughput than ad hoc way.

With Wi-Fi Straight, you lot tin can connect your printer to a Wi-Fi Direct network while meantime connecting to an admission bespeak, You can likewise apply a wired network and a Wi-Fi Direct network simultaneously so multiple users can access and print documents both from Wi-Fi Direct and from a wired network.

	You cannot connect to the cyberspace through the mobile device in use Wi-Fi Directly. The supported protocol list may differ from your model, Wi-Fi Direct networks exercise NOT support IPv6, network filtering, IPSec, WINS, and SLP services. Upward to four mobile devices tin connect to Wi-Fi Direct at one fourth dimension.

Setting up Wi-Fi Direct

You can enable Wi-Fi Straight characteristic by one of the following methods.

From the USB cablevision-connected reckoner(recommended)

• Later the driver installation is consummate, Samsung Piece of cake Printer Director tin exist fix and changes in the Wi-Fi Direct tin can exist made.

  	Samsung Easy Printer Manager is Bachelor for Windowsand Mac OS users simply.

  • From the menu, select or > > Samsung Easy Printer Manager > > .

    • : Select to enable.

    • : Enter the printer'south proper noun for searching for your printer on a wireless network. By default, the device name is the model name.

    • : Enter the IP address of the printer. This IP address is used merely for the local network and not for the infrastructure wired or wireless network. Nosotros recommend using the default local IP address (the default local IP address of the printer for Wi-Fi Direct is 192.168.3.1 )

    • : Actuate this selection to assign the printer the Wi-Fi Direct grouping's possessor. The acts similar to a wireless access point. We recommend activating this choice.

    • : If your printer is a , a is required for other mobile devices to connect to your printer. Yous tin can configure a Network Password yourself, or can remember the given Network Password that is randomly generated past default.

From the machine (Machines with a display screen)

• Select > > from the control panel.

• Enable .

From the network-connected computer

If your printer is using a network cablevision or a wireless admission point, y'all can enable and configure Wi-Fi Directly from SyncThru™ Spider web Service.

• Access , select > > > .

• Enable or disable and ready other options.

	For Linux OS users, Print an IP network configuration report to bank check the output (see Printing a network configuration study). Access , select > > > . Enable or disable .

Setting upwardly the mobile device

• After setting upwardly Wi-Fi Direct from the printer, refer to the user transmission of the mobile device you are using to set its Wi-Fi Direct.

• Subsequently setting upwardly Wi-Fi Directly, y'all need to download the mobile printing awarding (For example: Samsung Mobile printer) to print from your smartphone.

	When yous accept found the printer you want to connect to from your mobile device, select the printer and the printer's LED will blink. Press the WPS button on the printer and it volition be connected to your mobile device. If your mobile device does non support WPS, you need to enter the "Network Password" of a printer instead of pushing the WPS push.

What is Samsung Mobile Impress?

is a free application that enables users to print photos, documents, and web pages direct from your smartphone or tablet. is non simply compatible with your Android and iOS smart phones merely likewise with your iPod Bear on and tablet PC. It connects your mobile device to a network continued Samsung printer or to a wireless printer through a Wi-Fi access bespeak. Installing a new commuter or configuring network settings isn't necessary – merely simply install the application, and it will automatically observe compatible Samsung printers. As well press photos, web pages, and PDFs, scanning is besides supported. If yous have Samsung multfunction printer, scan any document into a JPG, PDF, or PNG format for quick and like shooting fish in a barrel viewing on your mobile device.

Downloading

To download , go to the application store (Samsung Apps, Play Store, App Shop) on your mobile device, and but search for "." Y'all can also visit iTunes for Apple devices on your computer.

Supported Mobile OS

• Android OS 2.ane or higher

• iOS 4.0 or higher

Supported devices

• iOS 4.0 or higher:iPod Impact, iPhone, iPad

• Android 2.1 or higher:Milky way series and Android mobile device

Troubleshooting

Problems during setup or driver installation

• Your machine may non exist turned on. Plough on your reckoner and the machine.

• USB cable is not connected between your computer and automobile. Connect the machine to your computer using the USB cable.

• The machine does not support wireless networking. Check the motorcar'south user's guide included on the software CD supplied with your machine and set a wireless network machine.

-

• The machine is unable to find the network name (SSID) you have selected or entered. Check the network name (SSID) on your admission point and attempt connecting again.

• Your access point is not turned on. Turn on your access point.

-

• Security is not configured correctly. Check the configured security on your access indicate and auto.

-

• Your reckoner is non receiving a signal from your machine. Check the USB cable and your machine's power.

-

• Your machine is connected with a wired network cable. Remove the wired network cable from your machine.

• The configured network address is unable to connect between your computer and machine.

  • For a DHCP network environment

    The receives the IP address automatically (DHCP) when estimator is configured to DHCP.

  • For a Static network surroundings

    The machine uses the static address when the computer is configured to static address.

    For case,

    If the computer'due south network information is as shown below:

    • IP address: 169.254.133.42

    • Subnet Mask: 255.255.0.0

    Then the machine's network information should exist as below:

    • IP address: 169.254.133. 43

    • Subnet Mask: 255.255.0.0 (Use the reckoner's subnet mask.)

    • Gateway: 169.254.133. one

Other problems

If issues occur while using the machine on a network, check the following:

	For information on the access point (or wireless router), refer to its own user's guide.

• Your computer, access betoken (or wireless router), or machine may not be turned on.

• Check the wireless reception around the machine. If the router is far from the machine or at that place is an obstruction, yous might take difficulty receiving the signal.

• Cycle the power for the access point (or wireless router), motorcar, and reckoner. Sometimes cycling the power tin can recover network communication.

• Bank check whether firewall software (V3 or Norton) is blocking the communication.

  If the computer and the motorcar are continued on the same network and it cannot be found when searching, firewall software might be blocking the communication. Refer to the user'due south guide for the software to plough it off and try searching for the auto once again.

• Check whether the machine'due south IP address is allocated correctly. Yous can check the IP address by printing the network configuration report.

• Bank check whether the access point (or wireless router) has a configured security (countersign). If it has a password, refer to the access point (or wireless router) ambassador.

• Check the machine's IP accost. Reinstall the machine driver and change the settings to connect to the machine on the network. Due to the characteristics of DHCP, the allocated IP address could change if the auto is not used for a long time or if the access betoken has been reset.

  Annals the product's MAC accost when you confogure the DHCP server on the admission point (or wireless router). So you tin always apply the IP address that is ready with the MAC address. You tin identify the Mac address of your machine by printing a network configuration report (see Printing a network configuration report).

• Check the wireless surround. You might not be able to connect to the network in the infrastructure surroundings where you need to type in a user's information earlier connecting to the admission point (or wireless router).

• This automobile just supports IEEE 802.11 b/m/n and Wi-Fi. Other wireless communication types (e.g., Bluetooth) are non supported.

• When using the advertizement hoc way, in operating systems such every bit Windows Vista, y'all might need to ready the wireless connectedness setting every fourth dimension you use the wireless machine.

• You cannot use infrastructure style and ad hoc mode at the same time for Samsung wireless network machines.

• The machine is inside the range of the wireless network.

• The machine is located away from obstacles that could block the wireless signal.

  Remove whatever big metal objects between the admission point (or wireless router) and the machine.

  Make sure the motorcar and wireless access betoken (or wireless router) are not separated by poles, walls, or back up columns containing metal or physical.

• The machine is located abroad from other electronic devices that may interfere with the wireless signal.

  Many devices tin can interfere with the wireless point, including a microwave oven and some Bluetooth devices.

• Whenever the configuration of your admission point (or wireless router) changes, you lot must exercise the production's wireless network setup again.

• If Wi-Fi Directly is ON, this machine only supports IEEE 802.11 b/g.

• If the access signal is gear up to work with the 802.11n standard only, it may notconnect to your motorcar.

butcherhishattly.blogspot.com

Source: http://www.samsungsetup.com/ts/manual/Samsung%20M2070%20Series/English/manual/BABBHHBB.htm